Finding the right outrigger pads is essential for crane operations, trailer stabilizing, and heavy equipment setup. The pads below are selected for durability, load capacity, portability, and weather resistance. Each product is evaluated on material quality, carrying convenience, and how well it distributes weight to prevent sinking or tipping on varied ground conditions. Use this guide to compare options and choose pads that fit your typical job sites and vehicle fleet.
| Product | Size | Pack Count | Material/Notes |
|---|---|---|---|
| NEATOOM Medium Outrigger Pad | 18″ x 18″ x 1.5″ | 2 Pack | RPE, stackable, high load |
| Mytee Products 18″ x 18″ Pad | 18″ x 18″ x 1.5″ | 2 Pack | Waterproof, chemical resistant |
| Mytee Products 24″ x 24″ Pad | 24″ x 24″ x 1.5″ | 2 Pack | Waterproof, chemical resistant |
| Mytee 24″ x 24″ x 1.5″ (4 Pack) | 24″ x 24″ x 1.5″ | 4 Pack | Heavy-duty, UHMWPE, strong load |
| Buyers Products OP18X18P | 18″ x 18″ x 1″ | 1 Pack | HDPE, rope-style handle |
NEATOOM 18″ Outrigger Pads (2 Pack)
NEATOOM’s medium outrigger pads are built to handle substantial crane loads while remaining stackable for easy storage. Made from reinforced polyethylene (RPE), they resist tearing, scratching, and wear, providing a long service life even under repeated use. The pads’ 18″ by 18″ footprint distributes ground pressure effectively, helping to prevent crane legs from tilting or sliding on uneven surfaces. Their 1.5″ thickness supports heavy machinery while maintaining a manageable weight for transport. The 2-pack setup is convenient for dual-leg stability on larger equipment or for use as replacements on multiple vehicle setups.
Mytee Products 18″ Outrigger Pad (2 Pack)
This 18″ x 18″ pad from Mytee Products emphasizes water resistance and chemical resistance, making it suitable for outdoor work with vehicles, wreckers, tow trucks, and service trucks. The 1.5″ thickness provides a stable footprint that helps prevent equipment legs from sinking into soft ground. Being non-conductive adds a layer of safety for electrical work on-site. The 2-pack design supports even distribution across two legs or allows pairing for larger machinery, reducing the risk of tilt during setup or loading/unloading tasks.
Mytee Products 24″ x 24″ Outrigger Pad (2 Pack)
This larger 24″ x 24″ pad from Mytee Products expands the contact area for heavy loads, helping to minimize ground pressure on soft surfaces. The 1.5″ thickness offers robust support for crane legs and stabilizers during operation. It’s designed to be waterproof and chemically resistant, making it suitable for trailering, crane work, and other demanding environments. The 2-pack option is practical for multi-leg setups or as replacement pads across a fleet of vehicles.
Mytee Products 24″ x 24″ x 2″ Outrigger Pad (4 Pack)
This 4-pack set features larger 24″ x 24″ pads with a thicker 2″ profile and recessed geometry to provide additional stabilization for cranes, wreckers, and RVs. The pads’ UHMWPE material offers a tough surface that resists wear, with a surface area totaling 4 square feet per pad, contributing to high crushing resistance and improved load distribution. A recessed diameter area helps create a steadier base even on uneven ground, and the 45-degree load rating aligns with heavy-duty stabilization needs.
Buyers Products OP18X18P HDPE Outrigger Pad
Buyers Products offers a straightforward HDPE 18″ x 18″ x 1″ outrigger pad with a rope-style handle for easy carrying. This pad is designed to protect concrete and other surfaces from heavy equipment impact. Its lightweight construction makes it suitable for quick site setup and transport, while the non-conductive material adds a safety edge for electrical work. The simple design is compatible with many standard crane and truck setups, delivering reliable stabilization without extra bulk.
Buying Guide: Key Purchase Considerations
- Load capacity and safety margins: Compare rated loads and consider a pad with a higher capacity than your maximum expected crane weight on site.
- Material and durability: HDPE and UHMWPE options resist tearing, chemical exposure, and weathering; check for UV resistance if pads will be left outdoors.
- Size and surface area: Larger footprints distribute weight more evenly on soft ground but add weight and bulk; match pad size to crane leg spacing and typical terrain.
- Thickness and stability: Thicker pads (1.5″ to 2″) offer greater bending resistance and stability on uneven surfaces.
- Portability and storage: Look for stackable designs and carrying handles to ease transport and organization on trailers and service vehicles.
- Maintenance and upkeep: Waterproof and oil/chemical resistant surfaces simplify cleaning and extend life on job sites.
- Pack quantity and fleet planning: Consider how many pads you need per crane or trailer, and whether multi-pack options fit your fleet’s rotation and redundancy.
- Environmental and ground conditions: If you frequently work on soft soils, mud, or gravel, prioritize larger footprints and higher load-bearing capacities.
- Safety features: Non-conductive materials and rounded edges reduce risk during setup and removal under windy or wet conditions.
When selecting outriggers, align the pad choice with your typical job sites, fleet size, and maintenance routines. For operations requiring frequent setup across multiple equipment types, a mix of 18″ and 24″ pads (including some thicker 2″ options) often provides the best balance of stability, portability, and durability. Always verify that the pad’s dimensions fit your crane legs and outriggers, and ensure that storage space on trailers or in service bays accommodates the selected packs.